Notice: have upgrade it from v2 into new v3 version. At present, v2 and v3 version are mix in CN Warehouse, will send radomly.

v3 Difference:

- change the frame kit into v3 version ( like photos showed)

- change the vtx into BLITZ 1.6W VTX

V2 Version：

Nagul5 v2 frame Kit

Wheelbase: 240mm*240mm
Body size: 170*170mm

SucceX Force 5.8g 800mW VTX Adjustable

- Item: SucceX-Force 800mW adjustable VTX
- Output voltage/ Max current: 5V 1A
- 12V input current: 40mA@PIT MODE, 95mA@25mW, 185mA@200mW，250mA@500mW, 380mA@800mW
- Output 48 frequency points,
- size:36*36*3mm
- PIT/25mW/200mW/400mW/800mW

new V3 Version

Nagula5 v3 frame kit

Wheelbase: 245士2mm

Size: 173*173*37 士2mm

BLITZ 1.6W VTX

Input voltage: 7V～36V
Interface: MMCX
Power levels: PIT/25mW/400mW/800mW/1600mW
Channels: 40 (including Raceband)
Mounting pattern: 30.5x30.5mm/Φ3
Lightweight: 18.9g (excluding antenna)
VTX telemetry: IRC Tramp
Betaflight IRC Tramp Configuration: Please download the attached VTX table for Betaflight!
RC Tramp VTX table values: 25/400/800/1600mW

V3 Features:
- Comes with BLITZ 1.6W VTX , high power, strong anti-interference
- CNC integral molding aluminum alloy lens brackt, the material is light and hard, more durable
- Lightweight design, using carbon fiber material, light material, high hardness, and the fuselage is more resistant to explosion.
- The center of gravity of the fuselage is low, the flight is more stable, and freestyle more easily
- Increase the anti-sparking module to prevent sparks caused by plugging in the battery and prolong the life of the battery plug.
- Compatible with Gopro5/6/7/8/9/10/11, DJI Action. ( NOT Included.)

Specification:

BLITZ F7 Flight Controller ( Separate FC Link)

MCU: STM32 F722
Gyro: BMI270
Barometer: DPS310
OSD Chip: AT7456E
Flash: 32MB (Blackbox flash)
UARTS: 6
Motor outputs: 4x (SH1.0 connector)
I2C serial: SDA / SLA pads
Smartaudio / IRC Tramp VTX protocol supported
LED controller: Yes
Beeper pad: Yes
Firmware target: IFRC-IFLIGHT_BLITZ_F722
Mount pattern: 30.5*30.5mm / 4mm PCB hole diameter
Dimensions: 36.5*35 mm
Weight: 7.8g

BLITZ E45S 4in1 ESC ( separate ESC Version to know more details )

Input oltage: 2-6S
Firmware: QH-40 16.7
Continuous current: 45A
Instantaneous current: 55A
MCU:BB21
Current sensor: yes scale 200
Drive signal support: DShot150/300/600MultiShot.OneShot
Weight: 15g

XING-E Pro 2207 1800KV 6S Brushless Motor( Separate Motor click here)

KV: 1800KV
Input Voltage: 3-6S
Configuration: 12N14P
Stator Diameter: 22mm
Stator Length: 7mm
Shaft Diameter: 5mm
Motor Dimension: 28.5x19.7mm (Dia*Len)
Weight: 33.8g
Idle Current(10) @10V: less than 1.2A
Max. Con. Power (180S): 845.3W
Internal Resistance: 81.5mΩ
Max. Current (180S): 35.22A

PRODUCT DESCRIPTION
Nazgul5 V2 is a 5" size BNF (Bind-and-Fly) quadcopter. it is updated XL5 V5 FPV frames. Pre-tuned and setup, everything you need is just bind-and-fly! Loads of power and smooth flights guaranteed using our popular XING-E motors with long-lasting NSK bearings. Got a hard hit and snapped an arm Don't worry, get some spares with your order and easy-swap out in field. Wanna strap your for GoPro on that beast as well Checkout our collection of high quality TPU prints for your cam!

Tips:VTX is set to 25mW by default! Power levels above 25mW require a HAM license or have to be approved by local authorities! Please ensure you're flying legal frequencies and use our prepared Betaflight VTX tables according to your region.

Specification:
BLITZ F7 & BLITZ E45S 45A flight stack
XING-E 2207 FPV Motor （6S 1800KV )
Wheelbase: 240mm*240mm
Body size: 170*170mm
Propeller size: 5 inch /5.1 inch
FC pattern: 30.5*30.5/20*20 mm
FPV cam spacing: 19mm
Weight: 393.4g (without battery)

Feature:
- 5mm arm design for more durability
- Easy-Swap arms
- LED illuminated Logo
- XING-E 2207 motors and NAZGUL 5140 props
- 5" version also fits 5.1" style propellers
- Popular True-X configuration
- TPU crash-guards
- Fits both 30.5x and 20x stacks

Package Included:
1x Nazgul5 V2 240mm 5 Inch 6S FPV Racing Drone
1x RaceCam R1, 2.1mm lens 19x19mm camera
1x Albatross RHCP SMA 5.8g antenna
2sets x Nazgul 5 inch 3-blades (Set of 4 - Color may vary)
1x 20*200mm Microfiber PU Leather Battery Strap (Color May Vary)
1x 20*250mm Microfiber PU Leather Battery Strap (Color May Vary)

Additional Suggested Parts (Not Included)
Battery 6S 1300mAh
Camera mount for GoPro